|
E-mail:
mkalantari@alum.sharif.edu
Contact: +98 912
6760571
Address: No. 2, Bahar
Street South, Ferdos Blvd.,
Tehran,
Iran.
Date and Place of Birth:
Shiraz,
Iran,
03/28/1981
Gender: Male
Nationality: Persian
(Iranian)
Education:
M.S. Mechanical Engineering (Energy Conversion), Dec. 2005
Sharif University of
Technology,
Tehran,
Iran
http://www.sharif.ir/en/
Total GPA: 16.97/20
(rank 3rd)
Thesis: Numerical
simulation and study of flow and acoustics in vehicle silencers.
(Under supervision of
Prof. B. Farhanieh and Prof. S. KazemZadeh)
B.S.
Mechanical Engineering, Sept. 2003
Shiraz University (formerly Pahlavi University),
Shiraz,
Iran
http://www.shirazu.ac.ir/en/
Total GPA: 15.33/20
(rank 3rd)
Thesis: Developing
generalized software for optimization of water transmission pipelines and
preparing technical drawings. (Under supervision of
Prof. E. Goshtasbi Raad)
Research Interests:
Thermofluids:
Experimental and
Computational Fluid Dynamics
Micro- and Nano-scale
Fluid dynamics and
Heat Transfer
Coupled Flow-acoustic phenomena
Reacting Flows
Two Phase Flow
Fluid-Structure Interactions
Automotive
Internal Combustion Engine
Combustion Modeling
Bi-fuel and
Dual-fuel Engines
Alternative fuels
Unsteady pulsative flow modeling thorough engine
manifolds
Vehicle NVH
Vehicle HVAC
Honors
and
Achievements:
Ranked 4th
among 40 B.Sc. Graduates of Mechanical Engineering, Heat and Fluids,
2004.
Ranked 105th in
nation-wide entrance exam for M.S. Program in Mechanical Engineering
among 13000 participants, 2004.
Receiving
Research Scholarship for graduate study from Automotive Industries
Research and Innovation Centre (AIRIC), 2004-2006
Ranked 4th in
the M.Sc. program of Mechanical Engineering Energy Conversion -
Automotive Engineering, 2006.
English
Proficiencies:
TOEFL, Total Score 94
Reading 28, Listening 23,
Speaking 19, Writing 24
IELTS, Overall Score 7.0
Reading 7.0, Listening 6.5,
Speaking 6.0, Writing 7.5
GRE, Overall Score 1200
Quantitative 800, Verbal 400, Writing
3.0
Publications:
V.
Isfahanian, D. Kamandlooie, M.
Kalantari, "One-dimensional
Numerical simulation of turbocharger using nonlinear wave action method", 13th International
Annual Conference of Mechanical Engineering, Iran, 2005 (In Farsi)
B. Farhanieh, M.
Kalantari, D. kamandlooie,
"Numerical simulation and optimization of vehicle silencer using
one-dimensional nonlinear wave action method", 5th conference on internal
combustion engine, Tehran, Iran, 2007. (Recognized as distingushed article
and published in the Journal of Engine Research, Vol 13, 2008)
M.
Kalantari, D. Kamandlooie, A.
Esmaeili Sani, "Three-Dimensional Numerical simulation and optimization of
gas mixer for a bi-fuel internal combustion engine", 5th conference on internal
combustion engine, Tehran, Iran, 2007. (In Farsi)
A. Parvizi, M.
Kalantari, A. A. Khatibi,
"Numerical study on mechanical properties of single-walled carbon nanotubes",
2nd International Congress on Nanoscience and Nanotechnology, Iran, 2008
Researches
and Experiences:
Head of mechanical engineering students scientific
association, Shiraz University, 2001-2002
Editor-in-chief of mechanical engineering students scientific association
magazine, Shiraz University, 2002-2003
Some Accomplished Academic projects projects:
1. Determining exhaust gases composition of oxidation
of an arbitrary hydrocarbon fuel considering 11 products, spring 2002.
2. Numerical simulation and study of fluid flow
using Fluent® software as course projects, fall 2002:
- Supersonic turbulent flow around two dimensional
airfoil
- Heat transfer phenomena through heat pipes
- Normal Shock formation in a supersonic diffuser
3. Developing a computer code to analyze flow
thorough water distribution networks, 2003.
4. Developing generalized software for
optimization of water transmission pipelines and preparing technical
drawings
5. Numerical simulation of steady flow of
cooling air around turbine disks of a jet engine, 2004.
6. Numerical simulation and study of unsteady flow
through inlet manifold of internal combustion engine using nonlinear
one dimensional wave action method, 2005.
7. Simulation and study of thermodynamic cycle of a
4-strokes spark ignition internal combustion engine, considering 7
exhaust gas composition, fall 2005.
8. Three dimensional modeling and
geometrical optimization of air-gas mixing through bi-fuel internal
combustion engine gas mixer using Fluent® software, 2008.
Work Experiences
1. Design Assistant & Trainee,
Aban Air Cooler Co., designing shell-and-tube heat
exchangers and air coolers for petrochemical industries (2002 for a
6 months period)
2. Designer in chief, PPAS engineering Co.,
Consultant Engineering Co., design of water transfer pipelines and
distribution networks, 2004-2005
3. Working at
SAIPA Automotive Industries Research and
Innovation Centre (AIRIC)
as Design Engineer, (2005-2006)
4. Technical Supervisor, SAS Consultant Engineering
Co., designing water distribution networks, 2007 - present)
5. Designer and Inspector of HVAC
utilities, Constructions Engineers Organization, 2008 up to now
6. Quality Expert,
SAIPA Automotive Corporation,
resolving vehicle major defects (April 2006 - present)
Memberships:
ISME (Iranian Society of Mechanical Engineering),
(2002 – Present)
Iranian Society of Engine Research (2008 - Present)
Alumni Association of Mechanical Engineering of
Sharif University of Technology, (2004 – Present.)
Computer and Programming Skills:
Programming: MatLab, FORTRAN, Visual BASIC,
Autolisp
Drawing: AutoCAD, SolidWorks, Catia, Working
Model
Engineering Softwares: Fluent and Gambit,
ANSYS
General Skills: Microsoft Office
References:
 |
Prof. B. Farhanieh,
Professor,
Department of Mechanical
Engineering,
Sharif University of
Technology, Tehran, Iran.
bifa@sharif.edu
Tel: +98 21
66165537 Fax: +98 21
6000021
P.O. BOX:
11365-9567, Tehran |
 |
Prof. S. Kazemzadeh Hannani,
Professor,
Department of Mechanical
Engineering,
Sharif University of
Technology, Tehran, Iran.
hannani@sharif.edu
Tel:
+98 21 66165683 Fax: +98
21 6000021
P.O. BOX:
11155-9567, Tehran |
 |
Prof. M. E.
Goshtasbi Raad,
Assistant Professor,
Department of Mechanical Engineering,
Shiraz University, Shiraz, Iran.
Goshtasb@shirazu.ac.ir
Tel:
+98 711 6133072
Fax: +98 711
6287294 |
| 
