In The Name of God

Mohammad Azadi's Private Homepage

Ph.D. in Mechanical Engineering (graduated from Sharif University of Technology, Tehran, Iran, 2013)

InformationNewsEducationEmploymentPublication

My Page at PersianblogMy Page at ORCIDMy Page at SCOPUSMy Page at GoogleScholarMy Page at ResearchGate

Fatigue and Wear WorkGroupResearch and Technology DepartmentIrankhodro Powertrain CompanyIran Society of EngineSharif Optimizers Group


CURRENT AFFILIATION

Head of Research and Technology Department, Irankhodro Powertrain Company (IPCO), Tehran, Iran

CONTACT INFORMATION

Fax: +98 (21) 44535096

Phone: +98 (21) 44535095

Cell Phone: +98 (910) 2107280

Postal Address: Research and Technology Department, Irankhodro Powertrain Company (IPCO), 6th km of Karaj Makhsous Road, Tehran, Iran

Email Addresses: m.azadi.1983@gmail.com, m_azadi@ip-co.com, azadi@mech.sharif.ir, m_azadi@alum.sharif.ir

Top


NEWS

1) Call for Papers, The Journal of Engine Research (JER), website: http://www.engineresearch.ir

2) Call for Papers, 8th International Conference on Internal Combustion Engines (ICICE8), website: http://www.iranengine.com

3) Call for Papers, The Bi-Annual International Conference on Experimental Solid Mechanics (X-MECH2014), website: http://xmech.iust.ac.ir

Top


EDUCATION

2008-2013

Ph.D., Mechanical Engineering (Engine, Solid Mechanics), Sharif University of Technology, Tehran, Iran

Thesis: Thermo-mechanical fatigue lifetime prediction model for Al-alloy (A356.0) with thermal barrier coating

Supervisor: Prof. Gholam Hossein Farrahi

Averaged Grade: 17.34

2011

Visiting Researcher, Mechanical Engineering, University of Leoben (Montanuinversitaet), Leoben, Austria

Project: Thermo-mechanical fatigue and low cycle fatigue tests on aluminum and magnesium alloys

Supervisors: Dr. Gerhard Winter and Prof. Wilfried Eichlseder

2006-2008

M.Sc., Mechanical Engineering (Vehicle Structure and Body, Solid Mechanics), K.N. Toosi University of Technology, Tehran, Iran

Thesis: Analysis and improvement of NVH behavior of a passenger car by using the design of experiment method

Supervisors: Dr. Shahram Azadi and Dr. Mohammad Shariyat

Averaged Grade: 19.16

2002-2006

B.Sc., Mechanical Engineering (Solid Mechanics), Shiraz University, Shiraz, Iran

Thesis: Optimization of structures using in warning and advertise alarms

Supervisor: Dr. Farhang Daneshmand

Averaged Grade: 15.20

HONORS

2008

First placed in M.Sc. ranking, K.N. Toosi University of Technology, Iran

2009

Introduced as a scientific elite, the Iranian National Elite Institute, Iran

ADVISOR

MS.c. Thesis:

1) Mehdi Mokhtari Shirazabad, The effect of rare earth elements on high cycle fatigue behavior of magnesium alloy AZ91, Iran University of Science and Technology, 2013

2) Mohammad Ghodrati, Numerical simulation of Al-Si alloy fatigue behavior under thermo-mechanical and isothermal loadings, Sharif University of Technology, in progress

3) Mehran Felfeli, Modeling stress-strain behavior of aluminum alloy (A356.0) under thermo-mechanical loading, Sharif University of Technology, in progress

4) Ali Shamloo, Cyclic behavior modeling of magnesium alloy (AZ91) under thermo-mechanical and low cycle fatigue loadings, Sharif University of Technology, in progress

5) Milad Rezvani Rad, Simulation of thermal barrier coating under thermo-mechanical and low cycle fatigue loadings, Sharif University of Technology, in progress

INTERESTS

Automotive Engineering:

1) Engine Components

2) Vehicle Structure and Body

Solid Mechanics:

1) Composites and Functionally Graded Materials (FGMs)

2) Design of Experiment (DOE)

3) Elasticity, Plasticity and Visco-Plasticity

4) Failure Analysis and Material Investigation

5) Fatigue Testing and Modeling (HCF, LCF and TMF)

6) Finite Element Methods (FEMs)

7) Noise, Vibration and Harshness (NVH)

8) Thermal Barrier Coatings (TBCs)

9) Theories of Disks, Beams, Shells and Plates

PROFESSIONAL QUALIFICATIONS

Computer Skills:

Coding and Analysis: Microsoft Office, ORIGIN, MATLAB, MINITAB

Finite Element Method: HYPERMESH, ABAQUS, FEMFAT

Top


EMPLOYMENT HISTORY

Educational Carriers:

2013-Now

Paper Reviewer, Engineering Fracture Mechanics, Europe

2013-Now

Editorial Board Member, The Journal of Engine Research, Iran

2013-Now

Paper Reviewer, International Journal of Fatigue, Europe

2013-Now

Paper Reviewer, Materials Science and Engineering A, Europe

2013-2014

Conference Executive Chairman, 8th International Conference of Internal Combustion Engines, Iran 

2013

Paper Reviewer, Advancement in Scientific and Engineering Research, Turkey

2012-Now

Associated Editor, The Journal of Engine Research, Iran 

2012-Now

Executive Director, The Journal of Engine Research, Iran  

2012-Now

Advisor, MS.c. Thesis (4 cases), Sharif University of Technology, Iran

2012-2013

Advisor, MS.c. Thesis (1 case), Iran University of Science and Technology, Iran

2012-2013

Paper Reviewer, Advances in Ceramic Science and Engineering, Hong Kong

2012

Paper Reviewer, Sky Journal of Mechanical and Electrical Electronics Engineering, African countries

2011-Now

Paper Reviewer, The Journal of Engine Research, Iran

2011-Now

Paper Reviewer, International Conference on Internal Combustion Engines, Iran

2011-Now

Paper Reviewer, Meccanica, Italy

2010-Now

Paper Reviewer, Journal of Mechanical Science and Technology, South Korea

2009-Now

Paper Reviewer, International Journal of Engineering, Iran

2009

Paper Reviewer, International Mechanical Engineering Congress & Exposition (ASME), USA

2008-2010

Lecturer (Industrial Drawing, Hydraulic and Pneumatic, Computer Basics and Coding and Professional Foreign Language), Islamic Azad University, West Branch, Iran

2008-2009

Teaching Assistant (Mechanics of Materials), Sharif University of Technology, Iran

2008-2009

Laboratory Assistant (Laboratory of Mechanics of Materials), Sharif University of Technology, Iran

2007-2008

Teaching Assistant (Machine Design, Vibration and Mechanics of Materials), K.N. Toosi University of Technology, Iran

2006-2007

Teaching Assistant (Machine Design and Mechanics of Materials), Shiraz University, Iran

2006-2007

Laboratory Assistant (Laboratory of Mechanics of Materials), Shiraz University, Iran

Industrial Carriers:

2013-Now

Inspector, Iranian Society of Engine (ISE), Iran (elected for the second time)

2012-Now

Head, Research and Technology Department, Irankhodro Powertrain Company (IPCO), Iran

2012-Now

Head, Fatigue and Wear Workgroup, Irankhodro Powertrain Company (IPCO), Iran

2010-2012

Head, Fatigue Workgroup, Irankhodro Powertrain Company (IPCO), Iran

2009-2012

Inspector, Iranian Society of Engine (ISE), Iran

2008-2012

Expert (Engineer), Engine/Vehicle Laboratory and Validation Department, Irankhodro Powertrain Company (IPCO), Iran

2008

Expert (Engineer), CAE Department, Irankhodro Powertrain Company (IPCO), Iran

Top


PUBLICATIONS

H-Index in SCOPUS: 3 (Author ID: 35077100300, Citations NO: 20)

H-Index in Google Scholar: 4 (Citations NO: 43)

Score in Research Gate: 15.12

Score in ORCID: - (Author ID: 0000-0001-8686-8705)

Chapter Books:

2011

1) Heat Transfer - Mathematical Modelling, Numerical Methods and Information Technology, Chapter 11, Thermo-elastic stresses in FG-cylinders, Mohammad Azadi and Mahboobeh Azadi, Edited by Aziz Belmiloudi, ISBN 978-953-307-550-1, InTech Publication, February 2011

Journal Papers:

2008

1) Mehrnoosh Damircheli and Mohammad Azadi, Non-linear thermo-elastic stresses analysis of a rotating FG-disk by considering temperature dependency of material properties, Journal of Solid Mechanics in Engineering, Islamic Azad University of Khomeinishahr Branch, Khomeinishahr, Iran, Year 1, Number 2, pp. 53-61, Summer 2008 (in Persian)

2009

2) Mohammad Azadi and Mehrnoosh Damircheli, Solid-fluid interaction and its effects on piping systems, Journal of Sharif Mechanics, Tehran, Iran, Year 13, Number 36, pp. 60-63, Summer 2009 (in Persian)

3) Mohammad Azadi and Mahboobeh Azadi, Nonlinear transient heat transfer and thermoelastic analysis of thick-walled FGM cylinder with temperature-dependent material properties using Hermitian transfinite element, Journal of Mechanical Science and Technology, Volume 23, Number 10, pp. 2635-2644, 2009

4) Shahram Azadi, Mohammad Azadi and Farshad Zahedi , NVH Analysis and Improvement of a Vehicle Body Structure Using DOE Method, Journal of Mechanical Science and Technology, Volume 23, Number 11, pp. 2980-2989, 2009

5) Mohammad Azadi, Shahram Azadi, Mahmood Moradi and Farshad Zahedi, Multidisciplinary optimization of a car component under NVH and weight constraints using RSM, International Journal of Vehicle Noise and Vibration, Volume 5, Number 3, pp. 261-270, 2009

2010

6) Mohammad Shariyat, Davood Asgari and Mohammad Azadi, Analysis of transient thermo-elastic behavior of thick-walled FG-cylinder having temperature dependent material properties by using finite element method, Amirkabir Journal of Science and Technology, Amirkabir University of Technology, Tehran, Iran, Mechanical and Aerospace Engineering Transaction, Year 42, Number 3, 2010 (in Persian)

7) Mohammad Azadi and Mohammad Shariyat, Nonlinear transient transfinite element thermal analysis of thick-walled FGM cylinders with temperature-dependent material properties, Meccanica, Volume 45, Number 3, pp. 305-318, 2010

2011

8) Mohammad Azadi, Free and forced vibration analysis of FG-beam considering temperature dependency of material properties, Journal of Mechanical Science and Technology, Volume 25, Number 1, pp. 69-80, 2011

9) Mehrnoosh Damircheli and Mohammad Azadi, Temperature and thickness effects on thermal and mechanical stresses of rotating FG disk, Journal of Mechanical Science and Technology, Volume 25, Number 3, pp. 827-836, 2011

10) Atieh Moridi, Mohammad Azadi and Gholam Hossein Farrahi, Coating thickness and roughness effect on stress distribution of A356.0 under thermo-mechanical loadings, Procedia Engineering, Volume 10, pp.1373-1378, 2011

11) Mehdi Mokhtari Shirazabad, Seyed Mohammad Ali Boutorabi, Mohammad Azadi and Mehdi Nikravan, An investigation of high cycle fatigue behavior of magnesium alloy for cylinder head application, The Journal of Engine Research, Volume 24, pp. 29-35, 2011 (in Persian)

12) Atieh Moridi, Mohammad Azadi and Gholam Hossein Farrahi, Numerical simulation of thermal barrier coating system under thermo-mechanical loadings, Lecture Notes in Engineering and Computer Science, Volume 2192, Number 1, pp. 1959-1964, 2011

2012

13) Mahdi Maghsoudi Mehrabani, Ali Asghar Jafari and Mohammad Azadi, Multidiciplinary optimization of a stiffened shell by genetic algorithm, Journal of Mechanical Scienece and Technology, Volume 26, Number 2, pp. 517-530, 2012

14) Mohammad Azadi, Atieh Moridi and Gholam Hossein Farrahi, Optimal design experiment of plasma thermal spray parameters at bending loads, International Journal of Surface Science and Engineering, Volume 6, Number 1/2, pp. 3-14, 2012

15) Mohammad Azadi, Amir Mafi, Mehdi Roozban and Farshid Moghaddam, Failure analysis of a crack gasoline engine cylinder head, Journal of Failure Analysis and Prevention, Volume 12, Number 3, pp. 286-294, 2012

16) Mohammad Azadi, Mehdi Roozban and Amir Mafi, Failure analysis of an intake valve in a gasoline engine, The Journal of Engine Research, Volume 26, pp. 3-9, 2012

17) Gholam Hossein Farrahi, Milad Rezvani Rad and Mohammad Azadi, Coating thickness effect on stress distribution of coated cylinder head considering residual stress, The Journal of Engine Research, Volume 26, pp. 49-57, 2012

2013

18) Mohammad Azadi and Mehdi Mokhtari Shirazabad, Heat treatment effect on thermo-mechanical fatigue and low cycle fatigue behaviors of A356.0 aluminum alloy, Materials and Design, Volume 45, pp. 279-285, 2013

19) Mohammad Azadi, Effects of strain rate and mean strain on cyclic behavior of aluminum alloys under isothermal and thermo-mechanical fatigue loadings, International Journal of Fatigue, Volume 47, pp. 148-153, 2013

20) Mohammad Azadi, Mahdi Baloo, Gholam Hossein Farrahi and Seyed Mostafa Mirsalim, A review of thermal barrier coating effects on diesel engine performance and components lifetime, International Journal of Automotive Engineering, Volume 3, Number 1, pp. 305-317, 2013

21) Mohammad Azadi, Gholam Hossein Farrahi, Gerhard Winter and Wilfred Eichlseder, The effect of various parameters on out-of-phase thermo-mechanical fatigue lifetime of A356.0 cast aluminum alloy, International Journal of Engineering Transactions C: Aspects, Volume 26, Number 12, pp. 873-883, 2013

2014

22) Mohammad Azadi, Gholam Hossein Farrahi, Gerhard Winter and Wilfred Eichlseder, Fatigue lifetime of AZ91 magnesium alloy subjected to cyclic thermal and mechanical loadings, Materials and Design, Volume 53, pp. 639-644, 2014

Articles in press

23) Mohammad Azadi, Gholam Hossein Farrahi, Gerhard Winter and Wilfred Eichlseder, Thermo-mechanical behaviors of light alloys in comparison to high temperature isothermal behaviors, Accepted in Materials at High Temperatures, 2013 

24) Mohammad Azadi, Gholam Hossein Farrahi and Atieh Moridi, Optimization of air plasma sprayed thermal barrier coating parameters in diesel engine applications, Accepted in Journal of Materials Engineering and Performance, 2013

25) Gholam Hossein Farrahi, Mohammad Azadi, Gerhard Winter and Wilfred Eichlseder, A new energy-based isothermal and thermo-mechanical fatigue lifetime prediction model for aluminum-silicon-magnesium alloy, Accepted in Fatigue and Fracture of Engineering Materials and Structures, 2013

26) Mohammad Azadi, Gholam Hossein Farrahi, Gerhard Winter and Wilfred Eichlseder, Experimental Fatigue lifetime of un-coated and coated aluminum alloy under isothermal and thermo-mechanical loadings, Accepted in Ceramics International, 2013

27) Gholam Hossein Farrahi, Mohammad Azadi and Farshad Zahedi, Low cycle fatigue analysis of magnesium alloy cylinder head based on plastic strain energy approach, Accepted in The Journal of Engine Research, 2013 (in Persian)

28) Atieh Moridi, Mohammad Azadi and Gholam Hossein Farrahi, Thermo-mechanical stress analysis of thermal barrier coating system considering thickness and roughness effects, Accepted in Surface and Coatings Technology, 2012

Conference Papers:

2008

1) Mohammad Shariyat, Mohammad Azadi and Davood Asgari, Finite element analysis of non-linear transient thermo-elastic stresses of hollow FG-cylinder for different heat transfer states by considering temperature dependency of material properties, 16th Annual (International) Conference on Mechanical Engineering, Volume 2, page 1401-1402, Shahid Bahonar University of Kerman, Kerman, Iran, May 2008 (in Persian) 

2) Mohammad Azadi, Dynamic response of FGM beam using modal analysis and FEM considering temperature dependency of properties, 2nd International Joint Conference on Composite Engineering & Design, The Acknowledge Management for Composite Materials, Vancouver BC, Canada, July 2008

3) Shahram Azadi, Mohammad Shariyat, Mohammad Azadi and Farshad Zahedi, Making of frequency map of a vehicle in order to vibrational optimization, National Conference of Mechanical Engineering, page 41, Islamic Azad University of Khomeinishahr Branch, Khomeinishahr, Iran, November 2008 (in Persian) 

4) Mehrnoosh Damircheli and Mohammad Azadi, Non-linear stresses analysis of a rotating disk made of FG-material by using finite element method, National Conference of Mechanical Engineering, page 3, Islamic Azad University of Khomeinishahr Branch, Khomeinishahr, Iran, November 2008 (in Persian) 

5) Mohammad Shariyat, Ali Asghar Jafari, Yaser Pornaghi and Mohammad Azadi, Free and forced vibration analysis of a complete finite element model of a heavy vehicle and optimization of vibrational behavior, National Conference of Mechanical Engineering, page 43, Islamic Azad University of Khomeinishahr Branch, Khomeinishahr, Iran, November 2008 (in Persian) 

6) Mohammad Shariyat, Shahram Azadi, Farshad Zahedi and Mohammad Azadi, Damage analysis of antiroll bar comparing experimental and theoretical results, National Conference of Mechanical Engineering, page 168, Islamic Azad University of Khomeinishahr Branch, Khomeinishahr, Iran, November 2008

2009

7) Mohammad Azadi and Mehrnoosh Damircheli, Dynamic response of FGM Beam using modal analysis and FEM considering temperature dependency of properties, 7th International Conference on Composite Science and Technology, American University of Sharjah, Sharjah, UAE, January 2009

8) Mohammad Azadi and Mehrnoosh Damircheli, Nonlinear transient heat transfer and thermoelastic analysis of thick-walled FGM cylinder with temperature-dependent material properties using Hermitian transfinite element, 7th International Conference on Composite Science and Technology, American University of Sharjah, Sharjah, UAE, January 2009 

9) Mohammad Azadi, Shahram Azadi, Farshad Zahedi and Mahmood Moradi, Multidisciplinary optimization of a back-bonnet of a vehicle under noise, vibration, harshness and weight by using response surface method, 6th Annual Student Conference on Mechanical Engineering, page 173, Amirkabir University of Technology, Tehran, Iran, March 2009 (in Persian) 

10) Mehrnoosh Damircheli and Mohammad Azadi, Stresses analysis of a rotating FG-disk by using finite element method and considering temperature dependency of material properties, 6th Annual Student Conference on Mechanical Engineering, page 80, Amirkabir University of Technology, Tehran, Iran, March 2009 (in Persian)

11) Mohammad Azadi, Farshad Zahedi and Mehrnoosh Damircheli, Free vibration analysis of FG-beam by using finite element and considering temperature dependency of material properties, 6th Annual Student Conference on Mechanical Engineering, page 79, Amirkabir University of Technology, Tehran, Iran, March 2009 (in Persian) 

12) Mohammad Azadi, Shahram Azadi and Farshad Zahedi, Structural optimization of an off-road vehicle based on NVH analysis using DOE method, 17th Annual (International) Conference on Mechanical Engineering, Volume 3, page 207-208, Tehran University, Tehran, Iran, May 2009 

13) Gholam Hossein Farrahi, Jalal Fathi Sola and Mohammad Azadi, Fatigue life analysis of finite element model of national engine piston pin and comparing different theories, 6th International Conference on Internal Combustion Engines, page 121-122, Irankhodro Powertrain Company (IPCO), Tehran, Iran, November 2009 (in Persian) 

14) Farshad Zahedi, Mohammad Azadi and Jalal Fathi Sola, Thermo-mechanical stresses analysis of the exhaust manifold to evaluate the fatigue life for different used materials, 6th international conference on internal combustion engines, page 251-252, Irankhodro Powertrain Company (IPCO), Olympic Hotel, Tehran, Iran, November 2009 

15) Mohammad Azadi and Mehrnoosh Damircheli, Nonlinear thermoelastic stress analysis of the rotating FGM disk with variable thickness and temperature-dependent material properties using finite element method, International Mechanical Engineering Congress & Exposition (ASME), Lake Buena Vista, Florida, USA, November 2009 

16) Mohammad Azadi and Farshad Zahedi, Fatigue analysis of antiroll bar for periodic and random inputs using various theories and introducing a new method, International Mechanical Engineering Congress & Exposition (ASME), Lake Buena Vista, Florida, USA, November 2009 

17) Mohammad Azadi, Shahram Azadi, Farshad Zahedi and Mahmood Moradi, Multidisciplinary optimization of a car component under NVH and weight constraints using RSM, International Mechanical Engineering Congress & Exposition (ASME), Lake Buena Vista, Florida, USA, November 2009 

2010

No paper

2011

18) Atieh Moridi, Mohammad Azadi and Gholam Hossein Farrahi, Optimizing constitutive cyclic plasticity model by genetic algorithm, 19th Annual Conference on Mechanical Engineering, Birjand University, Birjand, Iran, May 2011

19) Atieh Moridi, Mohammad Azadi and Gholam Hossein Farrahi, Coating thickness and roughness effect on stress distribution of A356.0 under thermo-mechanical loadings, 11th International Conference on the Mechanical Behavior of Materials, Lake Como, Italy, June 2011

20) Atieh Moridi, Mohammad Azadi and Gholam Hossein Farrahi, Numerical simulation of thermal barrier coating system under thermo-mechanical loadings, World Congress on Engineering, The International Conference of Mechanical Engineering, London, U.K., July 2011

21) Mohammad Azadi, Atieh Moridi and Gholam Hossein Farrahi, Optimization of plasma thermal spray parameters under bending loads by using design of experiment method, 14th International Conference on Advances in Materials and Processing Technologies, Istanbul, Turkey, July 2011

22) Amir Mafi and Mohammad Azadi, Failure analysis of an oil cooler in marine diesel engine, 7th international conference on internal combustion engines, page 108, Irankhodro Powertrain Company (IPCO), Tehran, Iran, November 2011 (in Persian)

23) Mohammad Azadi, Atieh Moridi and Gholam Hossein Farrahi, Optimization of thermal barrier coating parameters under fatigue and bending loadings in diesel engine application, 7th international conference on internal combustion engines, page 100, Irankhodro Powertrain Company (IPCO), Tehran, Iran, November 2011, (in Persian)

24) Mohammad Azadi, Amir Mafi, Seyed Vahid Hosseini and Peyman Sharghi, Dimensional contrary and material investigation in a cracked cylinder head, 7th international conference on internal combustion engines, page 106, Irankhodro Powertrain Company (IPCO), Tehran, Iran, November 2011 (in Persian)

25) Mohammad Azadi, Amir Mafi, Yaghoub Abbadzadeh and Farshid Moghaddam Jahangiri, Investigation of damage causes in a cracked cylinder head and finite element simulation, 7th international conference on internal combustion engines, page 57, Irankhodro Powertrain Company (IPCO), Tehran, Iran, November 2011 (in Persian)

2012

26) Gholam Hossein Farrahi, Mohammad Azadi, Gerhard Winter and Wilfried Eichlseder, Thermo-mechanical and low cycle fatigue behavior of aluminum alloy cylinder head, The International Conference on Experimental Solid Mechanics and Dynamics, page 1, Iran University of Science and Technology, Tehran, Iran, March 2012

27) Mohammad Azadi, Gerhard Winter, Gholam Hossein Farrahi and Wilfried Eichlseder, Cyclic behaviour of a cast magnesium alloy under low cycle and thermo-mechanical fatigue, 3rd Fatigue Symposium Leoben, Lightweight Design, page 248-254, University of Leoben, Leoben, Austria, April 2012

28) Atieh Moridi, Mohammad Azadi, Gerhard Winter, Gholam Hossein Farrahi and Wilfried Eichlseder, Modeling of high temperature cyclic behavior in aluminum alloy under thermo-mechanical and isothermal fatigue conditions, 3rd Fatigue Symposium Leoben, Lightweight Design, page 227-235, University of Leoben, Leoben, Austria, April 2012

29) Farshad Zahedi and Mohammad Azadi, Low cycle fatigue life analysis of magnesium alloy diesel engine cylinder head, 20th Annual International Iranian Mechanical Engineering Conference, page 11, Shiraz University, Shiraz, Iran, May 2012

30) Mohammad Azadi, Gholam Hossein Farrahi, Partik Huter and Gerhard Winter, Thermo-mechanical and high temperature low cycle fatigue analysis of aluminum alloy based on Sehitoglu's model, 20th Annual International Iranian Mechanical Engineering Conference, page 79, Shiraz University, Shiraz, Iran, May 2012 (in Persian)

31) Mehdi Mokhtari Shirazabad, Seyed Mohammad Ali Boutorabi, Mohammad Azadi, Mehdi Roozban, Amir Mafi, Mehdi Nikravan, Effect of rare earth elements on microtructure and high temperature mechanical properties of magnesium alloy with engine components application, 1st National Conference on Internal , Combustion Engine, page 70, Semnan University, Semnan, Iran, November 2012 (in Persian)

2013

32) Mehdi Mokhtari Shirazabad, Seyed Mohammad Ali Boutorabi, Mohammad Azadi and Mehdi Nikravan, Effect of casting parameters on microstructure and mechanical properties of AZ91 magnesium alloy, 7th Student Conference on Mechanical Engineering, page 185, Tehran University, Tehran, Iran, February 2013 (in Persian)

33) Mohammad Azadi and Gholam Hossein Farrahi, Sesitivity analysis of various parameters on lifetime of aluminum alloy with and without thermal barrier coating under isothermal and thermo-mechanical fatigue loadings, 7th Student Conference on Mechanical Engineering, Page 261, Tehran University, Tehran, Iran, February 2013 (in Persian)

34) Ali Shamloo, Mohammad Azadi, Gholam Hossein Farrahi and Mehran Felfeli, Parameters calibration of nonlinear isotropic/kinematic hardening model for magnesium alloy under cyclic loadings, 7th Student Conference on Mechanical Engineering, Page 286, Tehran University, Tehran, Iran, February 2013

35) Mehran Felfeli, Mohammad Azadi, Gholam Hossein Farrahi and Ali Shamloo, Application of nonlinear hardening model for aluminum alloy under low cycle and thermo-mechanical fatigue loadings, 7th Student Conference on Mechanical Engineering, Page 287, Tehran University, Tehran, Iran, February 2013 (in Persian)

36) Milad Rezvani Rad, Mohammad Azadi and Gholam Hossein Farrahi, Thermal barrier coating effect on stress distribution of a diesel engine cylinder head, 7th Student Conference on Mechanical Engineering, Page 260, Tehran University, Tehran, Iran, February 2013

37) Mohammad Azadi and Gholam Hossein Farrahi, Study of failure mechanism in coated aluminum alloy under isothermal and thermo-mechanical fatigue loadings, 21th Annual International Conference on Mechanical Engineering, Page 26, K.N. Toosi University of Technology, Tehran, Iran, May 2013

Top


Designed by M. Azadi (version WS.MA.3.3) 2013 All rights reserved. Last update: 23 August 2013